Mini Glider "KAWASEMI" [BFX17-UsNFYT] ver.1.5 (Update 06-21-2020) Palmtop size. Outdoor flight ready! Flight is possible if wind speed is 3 m or less. The T type has two fi characteristic of the head. The BFX17 series has a slightly thicker main wing than the BFX16 series. Print setting The recommended slicer is "Ultimaker Cura". 1)It's possible to output the printer modeling size in more than 110 mm of 140 mm. 2)Please use a material of the same weight as a ABS filament or ABS. 3)Print Layer Height 0.05mm exclusive use 4)Nozzle diameter :0.3mm recommendation 5)Infill:Grid pattern / Deity25%(standard) 6)Build Plate Adhesion Type:Skirt Optional parts_____ Display Stand Launcher Adjustment hooks Cutter_scraper for all 3D printer "KAWASEMI" [BFX16-UsNFY] ver.1.5 Thank you. 迷你滑翔机“翠鸟”[BFX17-UsNFYT]ver.1.5 是原创设计的橡胶午餐式3D印刷滑翔机。 T型的头部有两个特征性的指纹。 BFX17系列比BFX16系列稍微主翼厚一点的设计。 具有类似鸟的M型主翼和U型尾翼、多层叠层翼截面、双绞架等特征。 应对户外飞行。(可飞行到风速3米) 因为是手掌大小,小型ABS对应3D打印机也可以输出。 也可以输出ABS规格的BS01和idbox。 必须输出层叠厚度为0.05mm,但由于较小,输出时间较短。 详细内容已添加到压缩文件中。 Thank you.