图片
免费，登录即可下载
发布时间：2021/1/11 6:14:00
This is a 3d printable veion of the Klingberg Flying Wing.
Important!
Download the latest veion of the files before printing.
Order Prints Here:
About:
This is a 1.3 meter model, fully printable on 200mm by 200mm by 180mm volume 3d printe.
Specs:
Span: 1240mm
Print weight:320g
Area 19,2 dm2
Recommended Gear:
3s1800 or 3s 2200 or 4s 1300
28mm outrunner or 32mm outrunner
5 grams servos
Corona digital MG 5 dollar servos from HK
At 620 grams the wing loading is 32,2 g/dm2.
All Up Weight as a glider 400 grams?? I haven´t tested that yet.
All Up Weight with motor and 3s 2200 Battery less than 600 grams
I´m including in this listing all the STL files, 5 sectio per wing panel plus hatch, servo cove and hatch cove.
The KW was a glider and could have a pusher motor, they used a .10 cox I think, we will use an electric 28mm or 32mm diameter.
Notes:
At this time I´m releasing a slope glider veion that has a gear pocket where a 3s 2200mA/h battery can be fit, soon I´ll be releasing a pusher motor pod that will be glued on top of the wing as can be seen in the print scree. You can start printing before the pod is out because it will be made to glue on the wing skin as seen in the pictures.
I have not flown this wing but it was made over the original plan, the airfoils are the same, the washout, the angles, all the same as the original, only 1,3meter itead of 2 meter span.
I´m also including in this listing factory files so you can print tune the settings to your printer and Gcode files for a 200X200X180 mm direct drive machine, will work on an original Prusa or any similar machine.
The C.G. is from 54% to 62% of the chord length from the leading edge
To do:
Skid
Maybe a tricycle landing gear
Ordering Prints:
I´ll be offering prints of this wing for anyone interested, will add that listing to the site in the next few days as possible.
File Naming:
W-wing
WL-Wing Left
SPC-Servio Pocket Cover
HC-Hatch Cover
HCLR-Hatch Cover Left Right
A-Aileron
MP-Motor Pod
Change Log
3/3/2018
ted one of the wing gcodes, the bed temp was 56 itead of 60C.
all separate gcodes.
ed files for a prototype with 1 meter span I did before this final veion.
he servo pocket cove in stl, gcode and .factory formats
4/3/2018
the motor pod
8-3/2018
splitted stl´s for 150mm on Z machines.
10/3/2018
the skids
8/4/2018
the complete left wing and aileron.
Launching this Wing
This catapult seems interesting:
The hook has that strange rectangular shape because the point closer to the front is at the begining of the c.g. interval and the point closer to the back is a little after the c.g interval. The idea is to trim or fill it according to needs. I confess I don´t know much about bungee launching, never did it. So I came up with this solution. Will it work? I guess you guys will find out...
I hope you like this printable flying wing, one of my favourite FW of all time.
Please submit your makes to Thingivee and post your questio and ideas on the comments, this will help me to improve the design.
Video thanks to Mikael Christeen:
Important!
Download the latest veion of the files before printing.
Order Prints Here:
About:
This is a 1.3 meter model, fully printable on 200mm by 200mm by 180mm volume 3d printe.
Specs:
Span: 1240mm
Print weight:320g
Area 19,2 dm2
Recommended Gear:
3s1800 or 3s 2200 or 4s 1300
28mm outrunner or 32mm outrunner
5 grams servos
Corona digital MG 5 dollar servos from HK
At 620 grams the wing loading is 32,2 g/dm2.
All Up Weight as a glider 400 grams?? I haven´t tested that yet.
All Up Weight with motor and 3s 2200 Battery less than 600 grams
I´m including in this listing all the STL files, 5 sectio per wing panel plus hatch, servo cove and hatch cove.
The KW was a glider and could have a pusher motor, they used a .10 cox I think, we will use an electric 28mm or 32mm diameter.
Notes:
At this time I´m releasing a slope glider veion that has a gear pocket where a 3s 2200mA/h battery can be fit, soon I´ll be releasing a pusher motor pod that will be glued on top of the wing as can be seen in the print scree. You can start printing before the pod is out because it will be made to glue on the wing skin as seen in the pictures.
I have not flown this wing but it was made over the original plan, the airfoils are the same, the washout, the angles, all the same as the original, only 1,3meter itead of 2 meter span.
I´m also including in this listing factory files so you can print tune the settings to your printer and Gcode files for a 200X200X180 mm direct drive machine, will work on an original Prusa or any similar machine.
The C.G. is from 54% to 62% of the chord length from the leading edge
To do:
Skid
Maybe a tricycle landing gear
Ordering Prints:
I´ll be offering prints of this wing for anyone interested, will add that listing to the site in the next few days as possible.
File Naming:
W-wing
WL-Wing Left
SPC-Servio Pocket Cover
HC-Hatch Cover
HCLR-Hatch Cover Left Right
A-Aileron
MP-Motor Pod
Change Log
3/3/2018
ted one of the wing gcodes, the bed temp was 56 itead of 60C.
all separate gcodes.
ed files for a prototype with 1 meter span I did before this final veion.
he servo pocket cove in stl, gcode and .factory formats
4/3/2018
the motor pod
8-3/2018
splitted stl´s for 150mm on Z machines.
10/3/2018
the skids
8/4/2018
the complete left wing and aileron.
Launching this Wing
This catapult seems interesting:
The hook has that strange rectangular shape because the point closer to the front is at the begining of the c.g. interval and the point closer to the back is a little after the c.g interval. The idea is to trim or fill it according to needs. I confess I don´t know much about bungee launching, never did it. So I came up with this solution. Will it work? I guess you guys will find out...
I hope you like this printable flying wing, one of my favourite FW of all time.
Please submit your makes to Thingivee and post your questio and ideas on the comments, this will help me to improve the design.
Video thanks to Mikael Christeen:
|
共0个文件
压缩包大小：62MB
|
||
|---|---|---|
微信小程序
微信扫码打开此模型
迪威模型
微信扫码支付