克里顿的头35；2

This is a complete set of parts to convert a Malyan M150 / Cocoon Create / Wanhao Duplicator i3 printer from the original MK10 Extruder to a new print head with E3D V6 hotend and Remote Bowden extruder. There is also room for an inductive bed probe.
The combination should give a dramatic increase in print quality and speed, as well as being able to print higher temperatures and do bed mesh leveling. (if you also update the firmware) Also, complete V6 hotends are easier to find these days than MK10 parts.
It's not quite as good as a real Prusa i3, but significantly closes the gap.
Features:
Full Hotend conveion for E3D V6 (or clone) Univeal 1.75mm bowden kit
Remote Bowden adapter for original extruder.
Mounting points for 5015 Squirrel cage cooling fan (and duct)
Inductive probe mount for bed leveling
Bearing blocks and cable chain remain in place for fast swap.
Hotend Nozzle remai within 1-2mm of original position.
Slight (5-10mm) increase in Z-axis build volume. (no loss)
Significant head-weight decrease. (300 grams! About 50%)
Solves Belt Rubbing on Wanhao and Cocoon.
This is my fit customizer, and not all custom tolerances are working across-the-board. There will likely be updates/fixes over time, as it's a pretty large project file with literally a lot of moving parts.