修改

图片

迪威模型和Solidworks 联合会员
迪威网友a329c0
迪威网友a329c0

4G LTE MIMO外部天线

免费,登录即可下载
发布时间:2020/9/20 17:51:00
完成了一个很好的带:

源模型:

我做了一个外部固定天线与旋转能力。
外置天线显示出优异的效果,速度增加了一倍多,信号电平略有提高。
在我的村庄4G网络超载,和DC-HSPA 工作非常好。我看到这个网络类型的一个伟大的速度在15 MBPS,与4MBPS的内部没有外部天线。
我需要大约两米的单心铜线1.5mm。我把线条切成碎片,有时冷却的打印出来,焊透了。
同轴导线焊接在内衬板和外壳)(
在天线外面,以防万一铜线不被漆成灰色。
谢谢大家的工作。
更新一个伟大的Remix:

source model:

Manufactured an external antenna mount with the ability to rotate.
The external antenna showed excellent results,more than doubling the speed and slightly increasing the signal strength.
In my country house,the 4G network is overloaded,and DC-HSPA works very well.我看到一个excellent speed for this type of network of about 15MBps,veus 4 MBPS indoo without an external antenna.
我需要2 m of single-core copper wire 1.5mm。我把他们的cut pieces wire into the printout and soldered them,sometimes cooling the printout。
The coaxial wire is soldered to the inner core and the body)【the body braid is made of some metal covered with copper,it did not work to solder,I screwed it with a plastic screed.】
Outside the antenna,just in case the copper wire is not oxidized,painted with gray paint.
谢谢你为他们的工作的作者。
0个文件
压缩包大小:2MB
小程序二维码
微信小程序 微信扫码打开此模型
登录后发表评论
恒诺鑫科-专注碳素制品的开发与生产