图片
免费，登录即可下载
发布时间：2024/1/22 6:00:00
Zombicide Undead or Alive - Walls and Balconies
These walls are compatible with my Zombicide Wall System (ZWS)
File Names: Wall_40x_Wood__ are Walls, 40mm tall, with have wood texture. Some have 1 door, and they have from 0 to 3 windows. Balconies are Balcony_A etc. Connectors describe the shape (L=Corner, I=Straight, T=3 way)
Wall Pieces: Only the openings/doors are game relevant. Windows are not. Just look at length and whether there is a door or not. Wall_40x170_Wood_Door, Wall_40x170_Wood_Door_1Window, etc. are all interchangeable. The longest walls are 170mm long, and fit diagonally on a 150mmx150mm printer. On some tiles, you need to connect them to an 80mm wall to get the full length of the tile.
Balconies: If you don't care about shape, you can use Balcony_A,C,D,E interchangeably in any situation. Balcony B has a different connector, though. F is a mirror of E. They re-used assets for the extension...
Doors: Undead or Alive has no doors. The files include doors that you can put aside in case you want to use the walls for any other Zombicide or other game, or want wooden doors for any other ZWS wall. If you don't like them, get the sources from Tinkercad and remove the doors.
Height: Because Zombicide tiles are not to scale there is no correct height. 40mm is a compromise where players can see over the walls, but most actors cannot. This is compatible with the ZWS
Bases: The bases of the walls increase stability and make clips optional, but have drawbacks: Bases may prevent you from doing T-connections in the middle of a wall. Some longer walls have gaps in the bases for this reason. This is only a problem with inner walls.
Stability: If you have straight walls it's often worth it to add a single interior wall for stability
Connectors: If you only use outside walls print you only need L and I-connectors. If you do inside walls, print add T- and maybe X-connectors from ZWS and you find plenty of shorter walls there, too.
Print Lists
Option 1 - Just do balconies
This is the biggest bang for the buck. Few prints, and quick and easy setup.
Option 2 - Balconies and exterior Walls
This is how I play. It looks better than just balconies, but is not too painful to set up. Good compromise. There is a spreadsheet telling you what you need. There are also screenshots of that spreadsheet in the download section, but those may be more out of date.
The data is per tile. Sometimes walls across tiles connect, and you may want to add another I-Connector across tiles for stability. E.g Mission 7 could use another 5 I-connectors in addition to the 3 on the list, and the 9 L-connectors. They are optional, but while you are at it, just print another 5-10.
There are two tables listing what is needed for each scenario, one with minimal walls where they can be shared across missions and one with walls that match the tile with windows. It's another 10 walls to match them. Up to you if it's worth printing - and storing - them.
Option 3 - Balconies, interior and exterior Walls
This gets a bit busy, and is a pain to set up. ZWS has interior walls and the additional connectors you will need. I do not have a list for this, it's bad enough to make one for Option 2.
Related Thingies: Trains, Wagons, Zombicide Wall System
These walls are compatible with my Zombicide Wall System
The balconies fit on top of the 40mm walls from the Wall System. They have clips compatible with those walls, but can work without walls, too. In particular, if you need additional wall connectors, use the ones from the Wall System. Same if you want differently textured walls, you can just swap them in
Also check out the Train and Wagon
Printing
I print walls standing up, so the layers create some satisfying friction when clipped. No rafts or brim needed as they have a base. I print them along the axis the bed moves.
Long walls (may) have manual rafts at the end to prevent warping up. Cut them off after printing.
Walls with door or window openings may need support, depending on your printer. They print fine without support with PLA on my Adventurer 3, so definitely give it a try before you mess with supports.
Each balcony comes in a base and a railing. Print them separately (the base upside down) and you won't need to deal with supports at all. Then glue them together with super glue (cyanoacrylate). If you want to print a single piece, you can get the source files from TinkerCAD.
WIP
This is always work in progress. Happy to get any CC. I am printing and testing everything as we play through Undead or Alive, and some of the pictures may show older versions. Early versions were white plastic but the goal is to use brown, and maybe paint them eventually. Minis in the pictures may be from other editions of Zombicide (in particular modern first edition)
Sources
The walls are remixes of my Wall System and originally a remix of this. Those walls are lower, and the bases are printed separately, and then needed to be glued. Some of the textures come from various Tinkercad things.
Remix
All edits were made in (free) Tinkercard. For minor changes (e.g. texts on the wall) just get the sources from Tinkercad.
Just in case it's needed, here is a print list
From the spreadsheet
Undead or Alive Base Game
M0
1 x Balcony A, 1 x Balcony C, 1 x Wall170, 3 x Wall170_Door,
M1
1 x Balcony A, 1 x Balcony E, 1 x Balcony F, 2 x Connector_L, 2 x Connector_T, 2 x Wall100_Door, 5 x Wall170, 3 x Wall170_Door,
M2
1 x Balcony C, 1 x Balcony D, 1 x Balcony E, 1 x Balcony F, 5 x Connector_L, 1 x Connector_I, 4 x Wall50, 1 x Wall80, 2 x Wall100_Door, 1 x Wall170, 8 x Wall170_Door,
M3
1 x Balcony C, 1 x Balcony D, 9 x Connector_L, 2 x Connector_I, 4 x Wall50, 3 x Wall80, 1 x Wall80_Door, 2 x Wall100, 3 x Wall100_Door, 3 x Wall170, 5 x Wall170_Door,
M4
1 x Balcony A, 1 x Balcony C, 1 x Balcony D, 1 x Balcony E, 1 x Balcony F, 2 x Connector_L, 2 x Connector_I, 2 x Connector_T, 2 x Wall80, 2 x Wall100_Door, 7 x Wall170, 7 x Wall170_Door,
M5
1 x Balcony C, 1 x Balcony D, 1 x Balcony E, 1 x Balcony F, 3 x Connector_L, 1 x Connector_I, 2 x Connector_T, 2 x Wall80, 1 x Wall80_Door, 2 x Wall100, 1 x Wall100_Door, 3 x Wall170, 6 x Wall170_Door,
M6
1 x Balcony A, 1 x Balcony C, 1 x Balcony E, 1 x Balcony F, 2 x Connector_I, 2 x Connector_T, 2 x Wall80, 1 x Wall100_Door, 4 x Wall170, 6 x Wall170_Door,
M7
1 x Balcony C, 9 x Connector_L, 3 x Connector_I, 8 x Wall50, 3 x Wall80, 4 x Wall100_Door, 7 x Wall170_Door,
M8
1 x Balcony A, 1 x Balcony C, 1 x Balcony D, 1 x Balcony E, 1 x Balcony F, 1 x Connector_L, 2 x Connector_T, 1 x Wall100_Door, 4 x Wall170, 8 x Wall170_Door,
M9
1 x Balcony A, 1 x Balcony E, 1 x Balcony F, 6 x Connector_L, 2 x Connector_T, 1 x Wall80, 1 x Wall80_Door, 2 x Wall100, 2 x Wall100_Door, 3 x Wall170, 7 x Wall170_Door,
M10
1 x Balcony A, 1 x Balcony C, 4 x Connector_L, 1 x Connector_I, 2 x Connector_T, 2 x Wall80, 1 x Wall80_Door, 2 x Wall100, 1 x Wall100_Door, 3 x Wall170, 6 x Wall170_Door,
Gears & Guns
M1
2 x Balcony A, 1 x Balcony B, 1 x Balcony F, 5 x Connector_L, 5 x Wall80, 1 x Wall100, 5 x Wall170, 5 x Wall170_Door, 5 x Steam Machine,
M2
2 x Balcony A, 1 x Balcony F, 6 x Connector_L, 3 x Connector_I, 4 x Wall50, 7 x Wall80, 1 x Wall80_Door, 2 x Wall100_Door, 4 x Wall170, 6 x Wall170_Door, 5 x Steam Machine,
M3
1 x Balcony E, 2 x Balcony F, 4 x Connector_I, 2 x Connector_T, 3 x Wall80, 1 x Wall80_Door, 1 x Wall100_Door, 4 x Wall170, 6 x Wall170_Door, 3 x Steam Machine,
M4
1 x Balcony A, 4 x Connector_L, 2 x Connector_I, 5 x Wall80, 3 x Wall170, 6 x Wall170_Door, 3 x Steam Machine,
M5
1 x Balcony A, 1 x Balcony B, 1 x Balcony E, 1 x Balcony F, 8 x Connector_L, 3 x Connector_I, 2 x Connector_T, 2 x Wall50, 7 x Wall80, 2 x Wall100, 2 x Wall100_Door, 5 x Wall170, 7 x Wall170_Door, 4 x Steam Machine,
M6
2 x Balcony A, 1 x Balcony F, 8 x Connector_L, 3 x Connector_I, 4 x Wall50, 4 x Wall80, 1 x Wall80_Door, 3 x Wall100_Door, 4 x Wall170, 9 x Wall170_Door, 4 x Steam Machine,
M7
7 x Connector_L, 2 x Connector_I, 2 x Connector_T, 3 x Wall80, 1 x Wall80_Door, 1 x Wall100, 2 x Wall100_Door, 5 x Wall170, 5 x Wall170_Door, 3 x Steam Machine,
M8
1 x Balcony B, 1 x Balcony C, 1 x Balcony D, 10 x Connector_L, 4 x Wall50, 2 x Wall80, 2 x Wall100, 2 x Wall100_Door, 3 x Wall170, 6 x Wall170_Door, 3 x Steam Machine,
M9
1 x Balcony A, 1 x Balcony C, 1 x Balcony D, 9 x Connector_L, 1 x Connector_I, 1 x Wall50, 1 x Wall50_Door, 6 x Wall80, 3 x Wall100, 1 x Wall100_Door, 4 x Wall170, 8 x Wall170_Door, 2 x Steam Machine,
M10
1 x Balcony A, 1 x Balcony B, 2 x Balcony C, 1 x Balcony D, 7 x Connector_L, 1 x Wall50, 1 x Wall50_Door, 4 x Wall80, 4 x Wall100, 3 x Wall170, 6 x Wall170_Door, 3 x Steam Machine,
These walls are compatible with my Zombicide Wall System (ZWS)
File Names: Wall_40x_Wood__ are Walls, 40mm tall, with have wood texture. Some have 1 door, and they have from 0 to 3 windows. Balconies are Balcony_A etc. Connectors describe the shape (L=Corner, I=Straight, T=3 way)
Wall Pieces: Only the openings/doors are game relevant. Windows are not. Just look at length and whether there is a door or not. Wall_40x170_Wood_Door, Wall_40x170_Wood_Door_1Window, etc. are all interchangeable. The longest walls are 170mm long, and fit diagonally on a 150mmx150mm printer. On some tiles, you need to connect them to an 80mm wall to get the full length of the tile.
Balconies: If you don't care about shape, you can use Balcony_A,C,D,E interchangeably in any situation. Balcony B has a different connector, though. F is a mirror of E. They re-used assets for the extension...
Doors: Undead or Alive has no doors. The files include doors that you can put aside in case you want to use the walls for any other Zombicide or other game, or want wooden doors for any other ZWS wall. If you don't like them, get the sources from Tinkercad and remove the doors.
Height: Because Zombicide tiles are not to scale there is no correct height. 40mm is a compromise where players can see over the walls, but most actors cannot. This is compatible with the ZWS
Bases: The bases of the walls increase stability and make clips optional, but have drawbacks: Bases may prevent you from doing T-connections in the middle of a wall. Some longer walls have gaps in the bases for this reason. This is only a problem with inner walls.
Stability: If you have straight walls it's often worth it to add a single interior wall for stability
Connectors: If you only use outside walls print you only need L and I-connectors. If you do inside walls, print add T- and maybe X-connectors from ZWS and you find plenty of shorter walls there, too.
Print Lists
Option 1 - Just do balconies
This is the biggest bang for the buck. Few prints, and quick and easy setup.
Option 2 - Balconies and exterior Walls
This is how I play. It looks better than just balconies, but is not too painful to set up. Good compromise. There is a spreadsheet telling you what you need. There are also screenshots of that spreadsheet in the download section, but those may be more out of date.
The data is per tile. Sometimes walls across tiles connect, and you may want to add another I-Connector across tiles for stability. E.g Mission 7 could use another 5 I-connectors in addition to the 3 on the list, and the 9 L-connectors. They are optional, but while you are at it, just print another 5-10.
There are two tables listing what is needed for each scenario, one with minimal walls where they can be shared across missions and one with walls that match the tile with windows. It's another 10 walls to match them. Up to you if it's worth printing - and storing - them.
Option 3 - Balconies, interior and exterior Walls
This gets a bit busy, and is a pain to set up. ZWS has interior walls and the additional connectors you will need. I do not have a list for this, it's bad enough to make one for Option 2.
Related Thingies: Trains, Wagons, Zombicide Wall System
These walls are compatible with my Zombicide Wall System
The balconies fit on top of the 40mm walls from the Wall System. They have clips compatible with those walls, but can work without walls, too. In particular, if you need additional wall connectors, use the ones from the Wall System. Same if you want differently textured walls, you can just swap them in
Also check out the Train and Wagon
Printing
I print walls standing up, so the layers create some satisfying friction when clipped. No rafts or brim needed as they have a base. I print them along the axis the bed moves.
Long walls (may) have manual rafts at the end to prevent warping up. Cut them off after printing.
Walls with door or window openings may need support, depending on your printer. They print fine without support with PLA on my Adventurer 3, so definitely give it a try before you mess with supports.
Each balcony comes in a base and a railing. Print them separately (the base upside down) and you won't need to deal with supports at all. Then glue them together with super glue (cyanoacrylate). If you want to print a single piece, you can get the source files from TinkerCAD.
WIP
This is always work in progress. Happy to get any CC. I am printing and testing everything as we play through Undead or Alive, and some of the pictures may show older versions. Early versions were white plastic but the goal is to use brown, and maybe paint them eventually. Minis in the pictures may be from other editions of Zombicide (in particular modern first edition)
Sources
The walls are remixes of my Wall System and originally a remix of this. Those walls are lower, and the bases are printed separately, and then needed to be glued. Some of the textures come from various Tinkercad things.
Remix
All edits were made in (free) Tinkercard. For minor changes (e.g. texts on the wall) just get the sources from Tinkercad.
Just in case it's needed, here is a print list
From the spreadsheet
Undead or Alive Base Game
M0
1 x Balcony A, 1 x Balcony C, 1 x Wall170, 3 x Wall170_Door,
M1
1 x Balcony A, 1 x Balcony E, 1 x Balcony F, 2 x Connector_L, 2 x Connector_T, 2 x Wall100_Door, 5 x Wall170, 3 x Wall170_Door,
M2
1 x Balcony C, 1 x Balcony D, 1 x Balcony E, 1 x Balcony F, 5 x Connector_L, 1 x Connector_I, 4 x Wall50, 1 x Wall80, 2 x Wall100_Door, 1 x Wall170, 8 x Wall170_Door,
M3
1 x Balcony C, 1 x Balcony D, 9 x Connector_L, 2 x Connector_I, 4 x Wall50, 3 x Wall80, 1 x Wall80_Door, 2 x Wall100, 3 x Wall100_Door, 3 x Wall170, 5 x Wall170_Door,
M4
1 x Balcony A, 1 x Balcony C, 1 x Balcony D, 1 x Balcony E, 1 x Balcony F, 2 x Connector_L, 2 x Connector_I, 2 x Connector_T, 2 x Wall80, 2 x Wall100_Door, 7 x Wall170, 7 x Wall170_Door,
M5
1 x Balcony C, 1 x Balcony D, 1 x Balcony E, 1 x Balcony F, 3 x Connector_L, 1 x Connector_I, 2 x Connector_T, 2 x Wall80, 1 x Wall80_Door, 2 x Wall100, 1 x Wall100_Door, 3 x Wall170, 6 x Wall170_Door,
M6
1 x Balcony A, 1 x Balcony C, 1 x Balcony E, 1 x Balcony F, 2 x Connector_I, 2 x Connector_T, 2 x Wall80, 1 x Wall100_Door, 4 x Wall170, 6 x Wall170_Door,
M7
1 x Balcony C, 9 x Connector_L, 3 x Connector_I, 8 x Wall50, 3 x Wall80, 4 x Wall100_Door, 7 x Wall170_Door,
M8
1 x Balcony A, 1 x Balcony C, 1 x Balcony D, 1 x Balcony E, 1 x Balcony F, 1 x Connector_L, 2 x Connector_T, 1 x Wall100_Door, 4 x Wall170, 8 x Wall170_Door,
M9
1 x Balcony A, 1 x Balcony E, 1 x Balcony F, 6 x Connector_L, 2 x Connector_T, 1 x Wall80, 1 x Wall80_Door, 2 x Wall100, 2 x Wall100_Door, 3 x Wall170, 7 x Wall170_Door,
M10
1 x Balcony A, 1 x Balcony C, 4 x Connector_L, 1 x Connector_I, 2 x Connector_T, 2 x Wall80, 1 x Wall80_Door, 2 x Wall100, 1 x Wall100_Door, 3 x Wall170, 6 x Wall170_Door,
Gears & Guns
M1
2 x Balcony A, 1 x Balcony B, 1 x Balcony F, 5 x Connector_L, 5 x Wall80, 1 x Wall100, 5 x Wall170, 5 x Wall170_Door, 5 x Steam Machine,
M2
2 x Balcony A, 1 x Balcony F, 6 x Connector_L, 3 x Connector_I, 4 x Wall50, 7 x Wall80, 1 x Wall80_Door, 2 x Wall100_Door, 4 x Wall170, 6 x Wall170_Door, 5 x Steam Machine,
M3
1 x Balcony E, 2 x Balcony F, 4 x Connector_I, 2 x Connector_T, 3 x Wall80, 1 x Wall80_Door, 1 x Wall100_Door, 4 x Wall170, 6 x Wall170_Door, 3 x Steam Machine,
M4
1 x Balcony A, 4 x Connector_L, 2 x Connector_I, 5 x Wall80, 3 x Wall170, 6 x Wall170_Door, 3 x Steam Machine,
M5
1 x Balcony A, 1 x Balcony B, 1 x Balcony E, 1 x Balcony F, 8 x Connector_L, 3 x Connector_I, 2 x Connector_T, 2 x Wall50, 7 x Wall80, 2 x Wall100, 2 x Wall100_Door, 5 x Wall170, 7 x Wall170_Door, 4 x Steam Machine,
M6
2 x Balcony A, 1 x Balcony F, 8 x Connector_L, 3 x Connector_I, 4 x Wall50, 4 x Wall80, 1 x Wall80_Door, 3 x Wall100_Door, 4 x Wall170, 9 x Wall170_Door, 4 x Steam Machine,
M7
7 x Connector_L, 2 x Connector_I, 2 x Connector_T, 3 x Wall80, 1 x Wall80_Door, 1 x Wall100, 2 x Wall100_Door, 5 x Wall170, 5 x Wall170_Door, 3 x Steam Machine,
M8
1 x Balcony B, 1 x Balcony C, 1 x Balcony D, 10 x Connector_L, 4 x Wall50, 2 x Wall80, 2 x Wall100, 2 x Wall100_Door, 3 x Wall170, 6 x Wall170_Door, 3 x Steam Machine,
M9
1 x Balcony A, 1 x Balcony C, 1 x Balcony D, 9 x Connector_L, 1 x Connector_I, 1 x Wall50, 1 x Wall50_Door, 6 x Wall80, 3 x Wall100, 1 x Wall100_Door, 4 x Wall170, 8 x Wall170_Door, 2 x Steam Machine,
M10
1 x Balcony A, 1 x Balcony B, 2 x Balcony C, 1 x Balcony D, 7 x Connector_L, 1 x Wall50, 1 x Wall50_Door, 4 x Wall80, 4 x Wall100, 3 x Wall170, 6 x Wall170_Door, 3 x Steam Machine,
|
共0个文件
压缩包大小：24MB
|
||
|---|---|---|
微信小程序
微信扫码打开此模型
迪威模型
微信扫码支付