图片
免费，登录即可下载
发布时间：2021/1/30 12:29:00
(UPDATE) Added a picam quick mount!
A Raspberry Pi 3B/2B case with integrated mount for Prusa i3 MK3, mainly intended for Octoprint/Octopi scenario. Also a quick mount for Raspberry official camera.
Necessary parts:
4x M2 6mm (or shorter) wood screws for securing Rasberry Pi to the case.
2x M3 6mm screws for attaching the case on Prusa frame. This case supports both high/low positio.
600mm camera cable.
（更新）相机已添加快速挂载。
是为了将橡胶派3B/2B安装在Pusa i3MK3上的情况。用于Octoprint/Octopi。也有快速挂载棘轮官方相机。只是装进马达的槽里。
需要的东西：
为了将4xM26mm以下的木螺钉、棘轮派固定在机壳上。
2xM36mm以下的螺栓，安装在Plua框架上时可从2个阶段调节高度。无论哪个高度都可以对应。
600mm相机电缆
A Raspberry Pi 3B/2B case with integrated mount for Prusa i3 MK3, mainly intended for Octoprint/Octopi scenario. Also a quick mount for Raspberry official camera.
Necessary parts:
4x M2 6mm (or shorter) wood screws for securing Rasberry Pi to the case.
2x M3 6mm screws for attaching the case on Prusa frame. This case supports both high/low positio.
600mm camera cable.
（更新）相机已添加快速挂载。
是为了将橡胶派3B/2B安装在Pusa i3MK3上的情况。用于Octoprint/Octopi。也有快速挂载棘轮官方相机。只是装进马达的槽里。
需要的东西：
为了将4xM26mm以下的木螺钉、棘轮派固定在机壳上。
2xM36mm以下的螺栓，安装在Plua框架上时可从2个阶段调节高度。无论哪个高度都可以对应。
600mm相机电缆
|
共0个文件
压缩包大小：1MB
|
||
|---|---|---|
微信小程序
微信扫码打开此模型
迪威模型
微信扫码支付