修改

图片

迪威模型和Solidworks 联合会员
迪威网友b3c350
迪威网友b3c350

Redcat Gen 8中央滑动保护板锁紧螺母块

免费,登录即可下载
发布时间:2020/12/22 21:47:00
This is a block to take up the gap in the center skid plate for the Redcat Gen 8 International Harvester Scout II scale crawler. Due to the part having a void for the molding process, lock nuts are used from the factory to help keep the rear upper link screws from loosening up. This lock nut block fills the void, and helps keep the screw in place without having to use a lock nut.
Additional hardware needed:
2pcs: M3x25mm button head
To itall, remove the upper and lower link screws to get the links out of the way. Now iert the block into the void from the bottom of the skid plate, and reitall both links and screws. For best results, using M3x25mm screws going into the lock nut block is recommended.
Redcat parts on Thingivee are released under the Creative Commo Licee Attribution- NonCommercial- ShareAlike 4.0 International (CC BY-NC-SA 4.0).
We want to share these parts with the world, and we want to ipire people to make and share their own parts for their vehicles.

In keeping with the non-commercial clause of this licee, if you produce this part (Gen 8 Center Skid Plate Lock Nut ) for othe, you may not receive compeation in excess of $0.50 per part, plus your shipping costs. This number is calculated based on an average estimate of material cost and machine running costs.
0个文件
压缩包大小:120KB
小程序二维码
微信小程序 微信扫码打开此模型
登录后发表评论
恒诺鑫科-专注碳素制品的开发与生产

更多【Redcat Gen 8中央滑动保护板锁紧螺母块】相关 ››