图片
免费，登录即可下载
发布时间：2021/3/3 19:05:00
Seeing as the Nerf branded rechargeable battery is no longer made or available for cheap, let's make our own, using a Sub-C NiMH pack.
Needed:
7.2v or 9.6v NiMH pack
Matching connector
(2) 20mm stamping blanks (copper, nickel, nickel silver, something that can be soldered)
Wire
Solder
Soldiering Iron
(2) M3 x 20mm Machine screws
Solder wire leads to the top of the stamping blanks, as shown, to make the contacts. Slide into the appropriate slots (positive is in the back of the blaster), feeding the wire out the other side. If soldered as shown, the stripped wire you soldered will face towards the outside.
Press the wire cover into place. Attach your chosen connector to the wire leads. Place battery into the tray and connect. Attach the last printed piece with machine screws to secure the battery in place.
If you want more detail, read here:
Needed:
7.2v or 9.6v NiMH pack
Matching connector
(2) 20mm stamping blanks (copper, nickel, nickel silver, something that can be soldered)
Wire
Solder
Soldiering Iron
(2) M3 x 20mm Machine screws
Solder wire leads to the top of the stamping blanks, as shown, to make the contacts. Slide into the appropriate slots (positive is in the back of the blaster), feeding the wire out the other side. If soldered as shown, the stripped wire you soldered will face towards the outside.
Press the wire cover into place. Attach your chosen connector to the wire leads. Place battery into the tray and connect. Attach the last printed piece with machine screws to secure the battery in place.
If you want more detail, read here:
|
共0个文件
压缩包大小：1MB
|
||
|---|---|---|
微信小程序
微信扫码打开此模型
迪威模型
微信扫码支付