防爆灯-底座安装-16英寸-150瓦LED-I级1区C&D

EPL-16BS-1X150LED-100 Explosion Proof LED Light from Laon Electronics is rated Class I Division 1-2 Groups C & D and Class II Division 1-2 and uses a 16 inch Cree LED light head to produce 17,500 lume of light while drawing only 150 EPL-16BS-1X150LED-100 explosion proof LED light provides 10,000 square feet of work area coverage with 17,500 lume of light output. This portable LED light is mounted to a four leg aluminum base and has an LED light head measuring 16 inches wide by 14 inches tall. The LED light head on this unit produces a brilliant flood pattern of light that is ideal for illuminating enclosed areas and hazardous locatio where flammable vapo, gases and dusts may be present. Often referred to as simply a “tank light,” this unit is coidered univeal due to its ability to be passed through any conventional manhole such as those found in petrochemical containe and ship storage explosion proof LED light fixture is comprised of a 16 inch LED light head mounted atop a base stand fabricated from non sparking aluminum. Traferring the unit through manholes coists of simply removing the light head from the base, passing the light head and base through the manhole separately, and then reassembling the unit once iide. The lamp can be easily adjusted up or down 90 degrees and locked into position by simply loosening the two hand screws located on either side of the light head and retightening them once the desired angle is found. Included with this LED light cart is 100 feet of SOOW cord, which combined with the 360° of rotation and 90° of tilt offered by the LED light head provides an effective alternative to often cumbeome explosion proof string explosion proof LED light head in this unit features multiple LED drive which helps to increase the operational life of the fixture. With traditional LED lights, in the event an LED array or driver fails, the entire fixture no longer illuminates. This new series of LED lamps contai twelve individual LED boards configured in a series of banks. Each bank contai two LED boards with an individual driver. In the event of a driver failure, only one bank of LEDs will be effected while the other banks will continue to operate. In the event that of an LED failure, the mating LED will continue to Angles: When used as a portable lighting solution, the varying beam angles are each individually ideal for several environments. The 60° beam provides the most intee beam of the three optio. It is perfect for narrow, confined spaces and is ideally suited for tank cleaning purposes. It offe focused light to provide ample illumination to tight work spaces and other environments. The 125° beam offe a more diffused source of light that is also less intee in brightness. It is a great general area work light and performs well when used for outdoor illumination. The 140° beam offe a very wide lighting pattern and is ideal for situatio where lighting distance is not a concern, but illumination of a wider area and even light distribution is. The 140° beam is great for situatio that call for working in close proximity to lights such as in a paint gas burning and arc type lamps that have glass bulbs, LEDs have no filaments or fragile housings to break during operation. Itead of heating a small filament or using a combination of gases to produce light, light emitting diodes (LEDs) use semi-conductive materials that illuminate when electric current applied and emitting light. With LED lights, there is no warm up time or cool down time before re-striking and provide itant illumination when powered on, adding to the reliability of LED technology. By nature, LED light sources run significantly cooler than traditional lamps, reducing the chance of accidental bur and increased temperatures due to heat emissio. This solid state design of light emitting diodes provides a more reliable, stable, durable, and energy efficient light source over traditional within the workplace is another benefit of LED work lights and temporary lighting. All light sources produce heat. With traditional work lamps, such as incandescent and halogen light sources, the lamp reaches high surface temperatures. These surface temperatures introduce a burn risk to anyone to anyone that allows prolonged skin contact with the light source, as well as a fire hazard if a flammable material is accidentally set too close to the light source for an extended period of time. While LED fixtures do still produce heat, they are designed with heat sinks to properly dispee the heat. Each LED bulb is engineered to dispee and expel this heat quickly and efficiently, keeping the lamp cooler than traditional light sources. This explosion proof LED work light operates at a lower surface temperature than a comparable model with traditional light source, and thus does not present a significant burn risk if an operator or bystander accidentally brushed up agait an exposed lamp, and reduce the fire hazard should they fixture accidentally come in contact with a flammable material for a short period of time. This significantly increases the safety within the work environment.