“Der叉车”-Geeetech A10M和A20M双色打印机风扇导管

Because the cooling on my A10M and A20M was not quite convincing, I designed this part with following concepts in my mind:
More silent 40x10 or 40x20 Fan itead of the two 30mm fa for the hotend
Better cooling with a radial 5015 Fan
To see better whats printing
Customisable
The BLTouch has following X and Y offsets:
X= -43 mm
Y= 30,7mm
Check also the space so far you need some
What you'll need:
Extra parts:
1x Axial 40x10 or 40x20 (recommended) for the hotend
1x Radial 5015 for the Fan Duct / Part cooling fan
Printed Parts:
-Base
-Front
-PCF
-BLT Mount (optional)
1x recommended Hotend PCB Mount:
Mounting bits:
4xM2x12 for carriage
M3 Screws
4x 25mm
2x 10mm
3x 15mm(for BLT)
2x - 4x 15 /25m for the Fan
2x M3 nuts for the Partcoolingfan
I highly recommend a silicon sock on the hotend, otherwise, you will get min Temp Erro over 30% of the Partcoolingfan
Special Thanks belongs to Akos Wornerth that gave me a lot of input and hints he made also some kind of fanduct with the fan infront
Edit: 26.12.2018
Fixed a small Slicer issue in the Fanduct Modell, its now Beta 4
, thanks for the Feedback!