发布时间：2024/1/25 1:23:00
This is a parametric junction box for mounting a dome security camera. The provided STL fits Grandstream GXV3610 cameras. OpeCAD source is included, modify as needed for your camera. You can specify diameter, height, thickness, number of screw holes etc.
I recommend using the test flag and doing a 1mm high test print to verify fit to your camera mount before printing a full box.
Updated to allow tapered walls similar to commercially-available boxes.
Printed in PLA, 50% infill, 4 shells. Painted with a base coat of Rustoleum plastic primer and two top coats to match the soffits. Total cost is about $2.50 worth of filament and paint.
I recommend using the test flag and doing a 1mm high test print to verify fit to your camera mount before printing a full box.
Updated to allow tapered walls similar to commercially-available boxes.
Printed in PLA, 50% infill, 4 shells. Painted with a base coat of Rustoleum plastic primer and two top coats to match the soffits. Total cost is about $2.50 worth of filament and paint.
|
共个文件
压缩包大小：1013KB
|
||
|---|---|---|
微信小程序
微信扫码打开此模型
迪威模型
微信扫码支付