发布时间：2024/1/15 8:37:00
This is a project I started some ago (I still had a Prusa i3) and took me some time to finish.
Those of us who are close to the 40s, have been always touched by the idea of having a cabinet at home. Those playing machines we used to enjoy with a coin when we were boys. That's because, when I started my fit 3d printer, it was something i wanted to develop.
It has to be something easy to print, not so big for a home and cheap, so I started my design in blocks. All of these blocks are printable in small printe, then, you just "stich" them with some nuts and screws and the machine comes alive. It's easy, don't be afraid.
The "brain" of the machine is a Raspberry Pi B. I don't know if they are easy to find right now with the veion 2 at shops, and I don't have a Raspy2, but if someone needs it for a Raspberry 2 I can modify the STL.
The LCD is a 7'' chinese display, they are cheap and easy to find, about 20$.
Also we are going to need a voltage regulator to drop the current to 5v (Raspberry), a 12v power supply, the joystick (Sanwa Style) and 8 butto. I use 4 of them for playing, 1 for iert coin, 1 for player start, 1 for ENTER and 1 for SCAPE.
Configuration is easy, but if someone needs it I can upload a ISO from the SD.
Hope you enjoy!
It's in Spanish, but more info about the project ->
Those of us who are close to the 40s, have been always touched by the idea of having a cabinet at home. Those playing machines we used to enjoy with a coin when we were boys. That's because, when I started my fit 3d printer, it was something i wanted to develop.
It has to be something easy to print, not so big for a home and cheap, so I started my design in blocks. All of these blocks are printable in small printe, then, you just "stich" them with some nuts and screws and the machine comes alive. It's easy, don't be afraid.
The "brain" of the machine is a Raspberry Pi B. I don't know if they are easy to find right now with the veion 2 at shops, and I don't have a Raspy2, but if someone needs it for a Raspberry 2 I can modify the STL.
The LCD is a 7'' chinese display, they are cheap and easy to find, about 20$.
Also we are going to need a voltage regulator to drop the current to 5v (Raspberry), a 12v power supply, the joystick (Sanwa Style) and 8 butto. I use 4 of them for playing, 1 for iert coin, 1 for player start, 1 for ENTER and 1 for SCAPE.
Configuration is easy, but if someone needs it I can upload a ISO from the SD.
Hope you enjoy!
It's in Spanish, but more info about the project ->
|
共个文件
压缩包大小：1MB
|
||
|---|---|---|
微信小程序
微信扫码打开此模型
迪威模型
微信扫码支付