发布时间：2024/1/29 2:27:00
A custom design for Bondtech Dual Drive to mount directly on the E3D V6 hotend.
I wanted to design a mount what use nuts for the assemly to avoid any problem and the extruder is directly mounted on the hotend so there can't be any problem with the extrusion. The part cooling fan can be set to the lenght of the extruder (Vulcano or standard).
You need this:
-2x M3x5 screw
-6x M3x30 screw
-4x M3x60 screw
-10x M3 nut
-1x 5015 Blower style fan
-1x 40x40x10mm fan
This design is still work in progress. If you find anything please drop me a comment. :)
I wanted to design a mount what use nuts for the assemly to avoid any problem and the extruder is directly mounted on the hotend so there can't be any problem with the extrusion. The part cooling fan can be set to the lenght of the extruder (Vulcano or standard).
You need this:
-2x M3x5 screw
-6x M3x30 screw
-4x M3x60 screw
-10x M3 nut
-1x 5015 Blower style fan
-1x 40x40x10mm fan
This design is still work in progress. If you find anything please drop me a comment. :)
|
共个文件
压缩包大小：583KB
|
||
|---|---|---|
微信小程序
微信扫码打开此模型
迪威模型
微信扫码支付