发布时间：2024/6/27 18:12:00
Love the idea of Vertical Air Wind Turbines spinning away in my garden. But most desig are very basic with little to no flash. So I designed this one to be able to sit in a garden and give a bit more beauty even if it's not spinning.
This design does need a bit more wind than simpler spinne. But, the airfoil blades do work and will spin in the opposite direction than expected.
You will require two 605 bearings (As this is going to be outdoo in the weather, I'd suggest buying the Glass and Nylon ones). A 5mm rod (Metal or Carbon Fiber) with a length of no less than 175mm. If you wish to use the stand to secure it to the top of a wooden fence, you'll need 3 M4 Counteink screws.
This object requires no supports when printing.
This design does need a bit more wind than simpler spinne. But, the airfoil blades do work and will spin in the opposite direction than expected.
You will require two 605 bearings (As this is going to be outdoo in the weather, I'd suggest buying the Glass and Nylon ones). A 5mm rod (Metal or Carbon Fiber) with a length of no less than 175mm. If you wish to use the stand to secure it to the top of a wooden fence, you'll need 3 M4 Counteink screws.
This object requires no supports when printing.
|
共个文件
压缩包大小：4MB
|
||
|---|---|---|
微信小程序
微信扫码打开此模型
迪威模型
微信扫码支付