Raspberry pi ZERO w相机外壳V2

Raspberry pi ZERO w camera case V2
It is a case to store Raspberry pi ZERO w (wh or unmarked) and camera module (V2 veion)
Compared to the direction and position of the camera module are different.
Change log
2022/05/10
Updated , added groove to cut if camera cable interferes
2022/05/01
Addition of jig for mounting camera module
update
In the case of WH, the GPIO header interferes, so remove the header or cut off the pin with nippe etc.
If the screws interfere with the back of the board, iulate them.
If the heat sink (if italled) interferes, cut out the cooling slit.()
If the camera cable interferes, cut it from the groove.()
M3 x 8mm tapping screws x2-5
x1-2, x2
x1 (optional)
M2.6 x 8mm tapping screws x2-4
x2-4
M2.1 x 6.3 ~ M2.6 x 8mm tapping screw x1-2
x1-2
W1 / 4 (spanner size 10mm) hexagon nut x1-2 (optional)
x1-2 (Please press fit)
100 uniform le x1 (optional)
If the screw hole of does not fit, please enlarge it moderately.
Size (reference) ISO metric screw M17x1
Japanese
Raspberry pi ZERO w camera case V2
Raspberry pi ZEROw（wh或无印也可）和收纳照相机模块的情况（V2版）
更新历史
2022/05/10
更新，追加相机电缆干扰时剪切的槽
2022/05/01
相机模块安装用夹具追加11CameraFix。stl
11CameraCover.更新日志
WH的情况下，GPIO的头部会受到干扰，请去掉头部，或者用钳子等截取销
螺丝干涉基板背面时请绝缘
散热器（安装时）干涉时，请切断冷却用的缝隙（11 Back ）
相机电缆干扰时，请从槽部剪切（11 ）
M3×8mm攻丝螺钉x2～5
x1～2, x2
x1(optional)
M2.6x8mm攻丝螺钉x2～4
x2～4
M2.1 x 6.3 ～ M2.6x8mm攻丝螺钉x1～2
x1～2
W1/4（扳手尺寸10mm）六角螺母x1～2（optional）
×1～2（请压入）
100均等镜头x1（optional）
11LeMount.无法插入stl的螺丝孔时请适度扩大
尺寸（参考）ISO米螺钉M17x1