图片
免费，登录即可下载
发布时间：2024/1/17 12:41:00
Vacuum spindle adapter for and maybe othe using Adapter #1 from
The spindle mount from the CNC vacuum mount and adapter doesn't really work with the portal cyclone cnc. The vacuum tube is too high and the 52mm clamp design made the Z axis travel shorter. Long story short, The adapte needed help.
On my 400 watt spindle, there was a 4x34mm bolt circle on the bottom which is a great mounting spot for the portalcyclone. I also designed a hose support to help as a strain relief on the vacuum hose.
The spindle mount from the CNC vacuum mount and adapter doesn't really work with the portal cyclone cnc. The vacuum tube is too high and the 52mm clamp design made the Z axis travel shorter. Long story short, The adapte needed help.
On my 400 watt spindle, there was a 4x34mm bolt circle on the bottom which is a great mounting spot for the portalcyclone. I also designed a hose support to help as a strain relief on the vacuum hose.
|
共0个文件
压缩包大小：17KB
|
||
|---|---|---|
微信小程序
微信扫码打开此模型
迪威模型
微信扫码支付