发布时间：2024/8/6 8:26:00
All in One Direct Drive Extruder adapter - GeekDrive :-)
It has the best COG possible with the Stepper motor mounted ~3mm above the frame, and the shortest path to the Nozzle since it's directly feeds the Nozzle.
Important: Because of the tight tolerances- I recommend printing this parts at high quality.
I recommend upgrading the pulley wheels to Polycarbonate type to reduce the wear from the added Mass of the direct drive design, I have also ordered them and I hope to receive them this year (LOL) it's great upgrade for the Glass bed owne too.
Link to Polycarbonate wheels including bearings:
Regarding BMG extruder:
I hope to receive mine soon : and then I will make another veion to integrate their design into my carriage plate. I must have the part to test it myself before releasing, I hope it won't take long.
This mod replaces the X carriage and the stock extruder and combines all in one part.
I have designed the X carriage plate with many M3 screw holes so you can design your own attachment to itall on it (BLtouch/Fan ducts... etc'.)
Bed Size After itallation:
X:230mm.
Y:230mm with new Y_LimitSwitchBracket italled.
Z:~150mm until you itall Direct Driver exteion stepper cable.
Assembly Guide Album:
Make sure that the eccentric nut goes in like in this image- the hole is tight fit:
If you like to get 5015 Blower Fan Fan Duct- look Here :
Note: E_Housing.stl won't be compatible with this fan duct.
Important!
After fit itallation, make sure to Re-Tighten the Pulley Wheels screws after fit week of use - because printed plastic can have tiny gaps and after fit week the screws can feel little loose, after 2nd re-tightening it should last for long time, just keep an eye if the screws become little loose every 1~3 month.
I hope you like it and please feel free to design better fan Duct's to attache to the M3 screw holes on the E plate :-).
Updates:
Update July 17th:
Added Eccentric_Nut_Custom to replace the stock Eccentric Nut with larger model to help agait deforming, you can use the Drill jig on your already printed E plate and drill with 10mm drill or print the newer "GeekDrive_E_Plate_Custom_Eccentric_Nut" E plate, when assembling- you gonna need M5 Large washer under the Nut on the Eccentric wheel.
Important Update July 15th:
Craftrum_5015_FanDuct_RemixFor_GeekDriveV3 was deleted because of desing error in the part, Replaced by newer Craftrum_5015_FanDuct_RemixFor_GeekDriveV4 that fixed the problem.
Added GeekDrive_E_Plate_M3_Thread_Ierts and RadFanMount_M3_Thread_Ierts with 4.1mmx6.7mm holes for Brass M3 thread Ierts.
Update June 27th:
Added a better V3 design to reduce air outlet deformation.
Update Jun 25th:
After many of you asked me for 5015 fan ducts -I have modified the CRAFTRUM 5015 Fan duct by Holyfarrier to be compatible with my design:
Update Jun 21st:
Added Assembly Guide:
Update Jun 21st:
Added PartCoolerMountBodeyV3 with better design -better aim on nozzle tip..
Update Jun 19th:
Added E_Housing.STL for cleaner finish look.
Added PartCoolerMountBodeyV2 with better design.
Added with better :
Update Jun 18th:
Please replace the stock Y limit switch bracket with the new modded one Y_LimitSwitchBracket to get 230mm bed size on Y Axis:
It has the best COG possible with the Stepper motor mounted ~3mm above the frame, and the shortest path to the Nozzle since it's directly feeds the Nozzle.
Important: Because of the tight tolerances- I recommend printing this parts at high quality.
I recommend upgrading the pulley wheels to Polycarbonate type to reduce the wear from the added Mass of the direct drive design, I have also ordered them and I hope to receive them this year (LOL) it's great upgrade for the Glass bed owne too.
Link to Polycarbonate wheels including bearings:
Regarding BMG extruder:
I hope to receive mine soon : and then I will make another veion to integrate their design into my carriage plate. I must have the part to test it myself before releasing, I hope it won't take long.
This mod replaces the X carriage and the stock extruder and combines all in one part.
I have designed the X carriage plate with many M3 screw holes so you can design your own attachment to itall on it (BLtouch/Fan ducts... etc'.)
Bed Size After itallation:
X:230mm.
Y:230mm with new Y_LimitSwitchBracket italled.
Z:~150mm until you itall Direct Driver exteion stepper cable.
Assembly Guide Album:
Make sure that the eccentric nut goes in like in this image- the hole is tight fit:
If you like to get 5015 Blower Fan Fan Duct- look Here :
Note: E_Housing.stl won't be compatible with this fan duct.
Important!
After fit itallation, make sure to Re-Tighten the Pulley Wheels screws after fit week of use - because printed plastic can have tiny gaps and after fit week the screws can feel little loose, after 2nd re-tightening it should last for long time, just keep an eye if the screws become little loose every 1~3 month.
I hope you like it and please feel free to design better fan Duct's to attache to the M3 screw holes on the E plate :-).
Updates:
Update July 17th:
Added Eccentric_Nut_Custom to replace the stock Eccentric Nut with larger model to help agait deforming, you can use the Drill jig on your already printed E plate and drill with 10mm drill or print the newer "GeekDrive_E_Plate_Custom_Eccentric_Nut" E plate, when assembling- you gonna need M5 Large washer under the Nut on the Eccentric wheel.
Important Update July 15th:
Craftrum_5015_FanDuct_RemixFor_GeekDriveV3 was deleted because of desing error in the part, Replaced by newer Craftrum_5015_FanDuct_RemixFor_GeekDriveV4 that fixed the problem.
Added GeekDrive_E_Plate_M3_Thread_Ierts and RadFanMount_M3_Thread_Ierts with 4.1mmx6.7mm holes for Brass M3 thread Ierts.
Update June 27th:
Added a better V3 design to reduce air outlet deformation.
Update Jun 25th:
After many of you asked me for 5015 fan ducts -I have modified the CRAFTRUM 5015 Fan duct by Holyfarrier to be compatible with my design:
Update Jun 21st:
Added Assembly Guide:
Update Jun 21st:
Added PartCoolerMountBodeyV3 with better design -better aim on nozzle tip..
Update Jun 19th:
Added E_Housing.STL for cleaner finish look.
Added PartCoolerMountBodeyV2 with better design.
Added with better :
Update Jun 18th:
Please replace the stock Y limit switch bracket with the new modded one Y_LimitSwitchBracket to get 230mm bed size on Y Axis:
|
共个文件
压缩包大小：22MB
|
||
|---|---|---|
微信小程序
微信扫码打开此模型
迪威模型
微信扫码支付