iPad（或平板电脑）支架，带柔性挡板（壁装或底装）

A simple iPad holder with flexible flap
I designed it for my iPad with cover (11.0mm thickness) but should work out for similar size tablets too.
The flexible flap makes the take in-out handling much easier.
The picture shows mine that is bottom mounted on the living room table but I made wall mount veion as well. so please chose suitable one for your use.
Please place a side edge down so that you can print without support.
You may need to adjust wall shells to have 100% material on flexible part in the middle, in order to make proper spring function.
Both veio are intended to be fixed by 2 x 4mm screws.
(In Japanese)
简单的iPad支架（带有柔性襟翼）。
虽然制作了iPad（ 罩子，厚度11mm）用的，但是我想即使是相似尺寸的平板电脑也能使用。
多亏了柔性襟翼，收纳•取出变得容易了。
照片是底座在客厅的桌子上的，也制作了墙壁支架版，请根据用途选择。
侧面朝下，无需支持即可打印。
调整墙壁厚度，使中间的弹簧部分100%是实心的。
两种版本都设想用2根4mm的螺丝固定。