发布时间：2024/2/26 3:17:00
Hinged cover with fused outputs utilizing XT60 connecto for a Meanwell L PSU. Most likely will work for other low profile Meanwell PSUs also.
This is a remix from
I made both the top and bottom pieces longer to accommodate adding the fuse blocks, XT60 connecto and IEC socket.
I use this for running an LED controller and supplying power to 5 different LED strips.
A couple of notes. This is not perfect, but it ended up working for my needs. I may be revisiting it in the future as I found a need to use a relay for 5 of the (6 total) outputs.
If I were to print it again I would make the cover longer and possibly taller. Right now it is a very tight fit. I ended up using a tie wrap because I broke off the screw supports iide on the bottom cover.
I have included the Fusion 360 file, as the original poster also included his, making this remix possible. I almost didn't include it because it is a bit of a mess. I have seen othe slamming design files when they are posted and maybe not the most linearly efficient. I am not an expert at F360, it is an evening/weekend hobby at best. I do something completely different for a living. but I wanted to share this in case anyone else wanted to customize it for their needs.
Here is where I got the parts from, but they are all pretty standard partsizes, so just use these links as guidelines.
XT60 connecto
Fuse blocks
IECSocket
This is a remix from
I made both the top and bottom pieces longer to accommodate adding the fuse blocks, XT60 connecto and IEC socket.
I use this for running an LED controller and supplying power to 5 different LED strips.
A couple of notes. This is not perfect, but it ended up working for my needs. I may be revisiting it in the future as I found a need to use a relay for 5 of the (6 total) outputs.
If I were to print it again I would make the cover longer and possibly taller. Right now it is a very tight fit. I ended up using a tie wrap because I broke off the screw supports iide on the bottom cover.
I have included the Fusion 360 file, as the original poster also included his, making this remix possible. I almost didn't include it because it is a bit of a mess. I have seen othe slamming design files when they are posted and maybe not the most linearly efficient. I am not an expert at F360, it is an evening/weekend hobby at best. I do something completely different for a living. but I wanted to share this in case anyone else wanted to customize it for their needs.
Here is where I got the parts from, but they are all pretty standard partsizes, so just use these links as guidelines.
XT60 connecto
Fuse blocks
IECSocket
|
共个文件
压缩包大小：5MB
|
||
|---|---|---|
微信小程序
微信扫码打开此模型
迪威模型
微信扫码支付