神奇女侠2X

Original Design Wonder Woman
Added Lasso (5/12/18)
I wanted to print characte that are 2 times normal size,
Most parts have been redesigned, some reference from
Supernova_6969's Figurine Remixed
Putting on the arms I use a little veg oil on the body holes,
the arms will go in with a bit of pressure and rotating.
use supports on the head, but you can delete supports for the iide of the head.
use supports on the hair (prints upside down).
There are 3 different style legs A, B and C, check pics and choose which to print
A type : multicolor solid print, I used red until 11.5mm then yellow until 12.3mm
then flesh until 18.8mm then Blue
B type : print each one in the color listed then glue together
C type : print each one in the color listed then blue together
Too : Girl Shape 5 is provided in a solid veion and a split where the chest will be glued to the too. the too is a multi-color print : Blue until 3.8mm, yellow until 7.7mm, red until 13.6 mm
Face: I use Sharpie marke black and red.
Arms: start with yellow for 6mm then switch to flesh.