发布时间：2024/2/24 6:18:00
Extractor fan designed for 120mm (x27mm) fan, suitable for plexiglass enclosures.
Itruction video here
Filter section outside of enclosure, using standard 120mm Zortrax HEPA and Carbon filte.
Fan section iide enclosure. In this case a Noctua IPPC 3000 12v 120mm fan was used. Alternative high pressure fan would be X-Fan RDH1225S1 which is cheaper but has less force.
M3 bolts and square nuts.
EDPM seals 2.6mm x3(suggest buying 1m length) or print seals using TPU
Includes optional wind guard to prevent any turbulent blow back from the fan disturbing the print.
This was fitted to the excellent Tukkari TS plexiglass enclosure, with the original 60mm fan hole being widened to 120mm using a jigsaw and very fine metal/pastic cutting blade. This could also be fitted to a LACK enclosure. A template for the 8 bolt holes and main circular cutout is included (ignore the 4 corner holes that are acually used for the fan and dont require any plexi drilling))
Itruction video here
Filter section outside of enclosure, using standard 120mm Zortrax HEPA and Carbon filte.
Fan section iide enclosure. In this case a Noctua IPPC 3000 12v 120mm fan was used. Alternative high pressure fan would be X-Fan RDH1225S1 which is cheaper but has less force.
M3 bolts and square nuts.
EDPM seals 2.6mm x3(suggest buying 1m length) or print seals using TPU
Includes optional wind guard to prevent any turbulent blow back from the fan disturbing the print.
This was fitted to the excellent Tukkari TS plexiglass enclosure, with the original 60mm fan hole being widened to 120mm using a jigsaw and very fine metal/pastic cutting blade. This could also be fitted to a LACK enclosure. A template for the 8 bolt holes and main circular cutout is included (ignore the 4 corner holes that are acually used for the fan and dont require any plexi drilling))
|
共个文件
压缩包大小：2MB
|
||
|---|---|---|
微信小程序
微信扫码打开此模型
迪威模型
微信扫码支付