发布时间：2024/12/31 19:08:00
This system is designed to work with pegboard made from wood or pressboard about 1/8" thick, with 1/4" holes on 1" spacing. When your print settings are tuned, the hooks should snap into the pegboard snugly with very little slop. If you are using a thin metal pegboard panel, or a thicker wooden pegboard, the fit may not be as good.
This collection includes:
One-piece curved hooks, based on an arc segment, in various lengths and thicknesses
One-piece hooked hooks that are flat with a little retaining barb on the end, in various lengths and thicknesses
Two-piece long hooks that are stabilized well with a lateral brace piece, in several lengths
Arrays of 1, 3, 5, and 7 loops in four diamete. Choose a loop count and upper and lower diameter, print two loop arrays, then attach a pair of rack supports to them to create a rack of screwdriver holde. A single rack support is also provided, in case you just want one loop without a second one below it.
Open loops for round-handled tools such as ratchet wrenches and hamme, which let you snap the tool into place.
A drill holder system designed to hold a cordless drill. Print one drill holder front, one drill holder rear, and one double brace 5in with pegs. You can also brace it with two lateral braces, but you may have trouble with stability, as the drill is pretty heavy.
A model showing only the hook and peg that fit into the pegboard so that you can design whatever hook shape you want using your CAD software of choice,
There are V and H models included in this collection, which stand for Vertical and Horizontal. The hooks themselves are all V parts. Some are equipped with a rectangular notch, which accepts a mating H part. The loops are H parts that require a V-rack support in order to attach them to the pegboard.
Note: The double brace with pegs parts are only designed to work with the drill holder hooks as of this writing. If you try to assemble two long hooks with a double brace with pegs part, you will find that the double brace's pegs don't line up with any holes. However, two long hooks plus a pegless double brace works great.
Printing tips:
I use ABS, but PLA ought to work fine.
Adjust your print settings until the pegs fit snugly and the hooks feel firm, not loose and wobbly, after being italled. Get this dialed in before you go printing 20 hooks at once.
Do not change the scaling.
Increasing your extrusion multiplier (try 1.05 or 1.1) is one way to make the part "swell" and give it a tighter fit.
This collection includes:
One-piece curved hooks, based on an arc segment, in various lengths and thicknesses
One-piece hooked hooks that are flat with a little retaining barb on the end, in various lengths and thicknesses
Two-piece long hooks that are stabilized well with a lateral brace piece, in several lengths
Arrays of 1, 3, 5, and 7 loops in four diamete. Choose a loop count and upper and lower diameter, print two loop arrays, then attach a pair of rack supports to them to create a rack of screwdriver holde. A single rack support is also provided, in case you just want one loop without a second one below it.
Open loops for round-handled tools such as ratchet wrenches and hamme, which let you snap the tool into place.
A drill holder system designed to hold a cordless drill. Print one drill holder front, one drill holder rear, and one double brace 5in with pegs. You can also brace it with two lateral braces, but you may have trouble with stability, as the drill is pretty heavy.
A model showing only the hook and peg that fit into the pegboard so that you can design whatever hook shape you want using your CAD software of choice,
There are V and H models included in this collection, which stand for Vertical and Horizontal. The hooks themselves are all V parts. Some are equipped with a rectangular notch, which accepts a mating H part. The loops are H parts that require a V-rack support in order to attach them to the pegboard.
Note: The double brace with pegs parts are only designed to work with the drill holder hooks as of this writing. If you try to assemble two long hooks with a double brace with pegs part, you will find that the double brace's pegs don't line up with any holes. However, two long hooks plus a pegless double brace works great.
Printing tips:
I use ABS, but PLA ought to work fine.
Adjust your print settings until the pegs fit snugly and the hooks feel firm, not loose and wobbly, after being italled. Get this dialed in before you go printing 20 hooks at once.
Do not change the scaling.
Increasing your extrusion multiplier (try 1.05 or 1.1) is one way to make the part "swell" and give it a tighter fit.
|
共个文件
压缩包大小：7MB
|
||
|---|---|---|
微信小程序
微信扫码打开此模型
迪威模型
微信扫码支付