A450-2四轴无人机

This is the second quadcopter that I have designed and built. It includes a gimbal for a gopro style camera ( GPS, and up to 18 minutes of flight time (With a 5200 mAh battery).
Here is a full parts list:
Screws: (Only one type of screw) anything that is 3mm diameter and about 10 mm long. (Must have a point at the end)
Moto (Package comes with screws and esc's): moto
Flight Controller: APM flight controller (I would recomend a package like this that includes GPS, telemetry, power module, wires, and a vibration dampening mount.) flight controller
If you do not purchase a package then you will need a GPS, an APM power module, a vibration dampening mount, 3 pin servo wires, and telemetry.
Power Distribution Board: (This one includes slots for the LEDs)
Lights (Not Necessary) : I got these because they are cheap and attach nicely to the motor.
Props: 9*4.7 props. Any props will work but I used these (Make sure to get clockwise and counter clockwise).
Tramitter: Excellent affordable tramitter.
Receiver: The tramitter comes with a receiver but if you would like a longer rande more heavy duty one this receiver is :
Battery: Any battery will work but this one is cheap and has a high capacity. I have had no problems with it so far.
Gimbal Moto: Make sure to get 2.
Gimbal Controller: controller