发布时间：2024/5/30 14:41:00
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
PLEASE RESPECT THE LICEE AND GIVE CREDIT TO THE DESIGNER
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
New veion of my collection of sandals or my own TPU filament.
Modelled aprox 233mm long and 96mm wide, Print on A4 to compare with your foot and rescale part to your size
This is meant to be Earthing/Grounding sandals to hopefully support great health when still wearing shoes...
But the best is obviously to go outside and enjoy mother earth without shoes!
My big interest for health and well-being led me to, among other things of coue, to the concept of grounding/earthing. The research available strongly indicate that its very good for the body to be in contact with the ground, to get natural antioxidants that help the body to heal faster. Go here to find out more (I´m not affiliated with any of them)
Make sure you watch the videos if you do not like to dig into the hardcore research.
This design is liceed as Non-Commercial but if you use my filament (and also tell me that you are doing so - Im curious...) you are free to 3D-print and sell these sandals without other permissio. You can buy my filament here
Find tips on how to tie ribbon sandals: to tie ribbon sandals
The information here is for educational and entertainment purposes only. It is not
to be coidered medical advice, prescriptive or diagnostic. See your physician for
qualified health care.
I do not claim that these desig will work in any special way or that it is safe to use. Make sure the ground and neutral are not mixed up in your wall socket, do not risk anything, coult your electrician! You use my desig on your own risk and I am in no way respoible for any damages or injuries.
Please check out my unique UV-stable, flexible and conductive filament called ETPU 95-250 Carbon Black filament that was used to 3d print this part.
Don´t need the conductivity? Well the conductivity is great for some things but perhaps not your fit choice? Then coider this:
This filament will give you some really nice benefits if the conductivity is not an disadvantage for your 3D printed design:
•The material composition eliminates “stringing / webbing” issues.
•The hardness of 95 shore A and the carbon black filler makes for great print abilities.
•The carbon black filler is an excellent UV stabilizer thus the prints are built to last in very hah environments.
•The matte black surface finish has a very exclusive look.
•The material feels very nice and dry to touch.
•It´s not too stretchy and will do great for timing belts etc.
PLEASE RESPECT THE LICEE AND GIVE CREDIT TO THE DESIGNER
‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾‾
New veion of my collection of sandals or my own TPU filament.
Modelled aprox 233mm long and 96mm wide, Print on A4 to compare with your foot and rescale part to your size
This is meant to be Earthing/Grounding sandals to hopefully support great health when still wearing shoes...
But the best is obviously to go outside and enjoy mother earth without shoes!
My big interest for health and well-being led me to, among other things of coue, to the concept of grounding/earthing. The research available strongly indicate that its very good for the body to be in contact with the ground, to get natural antioxidants that help the body to heal faster. Go here to find out more (I´m not affiliated with any of them)
Make sure you watch the videos if you do not like to dig into the hardcore research.
This design is liceed as Non-Commercial but if you use my filament (and also tell me that you are doing so - Im curious...) you are free to 3D-print and sell these sandals without other permissio. You can buy my filament here
Find tips on how to tie ribbon sandals: to tie ribbon sandals
The information here is for educational and entertainment purposes only. It is not
to be coidered medical advice, prescriptive or diagnostic. See your physician for
qualified health care.
I do not claim that these desig will work in any special way or that it is safe to use. Make sure the ground and neutral are not mixed up in your wall socket, do not risk anything, coult your electrician! You use my desig on your own risk and I am in no way respoible for any damages or injuries.
Please check out my unique UV-stable, flexible and conductive filament called ETPU 95-250 Carbon Black filament that was used to 3d print this part.
Don´t need the conductivity? Well the conductivity is great for some things but perhaps not your fit choice? Then coider this:
This filament will give you some really nice benefits if the conductivity is not an disadvantage for your 3D printed design:
•The material composition eliminates “stringing / webbing” issues.
•The hardness of 95 shore A and the carbon black filler makes for great print abilities.
•The carbon black filler is an excellent UV stabilizer thus the prints are built to last in very hah environments.
•The matte black surface finish has a very exclusive look.
•The material feels very nice and dry to touch.
•It´s not too stretchy and will do great for timing belts etc.
|
共个文件
压缩包大小：7MB
|
||
|---|---|---|
微信小程序
微信扫码打开此模型
迪威模型
微信扫码支付