(Update 3/8/2019)A new veion is posted here (Update 1/21/2019) Added a desktop foot. A case for7-inch HDMI/VGA LCD module that can take up to 1920x1080 resolution (with auto scaling - the native resolution is 1280x800). This case supports VESA 75mm/100mm mount. Most monitor arms should just work. Upside-down mount is supported for the button part. These 3 files are minimum requirement for assembling this case: lcd3 back backside lcd3 front frontside lcdhid1 butto box (with IR receiver) Other files are various mounting optio (hooks and legs). You may or may not need them depending on your scenario. lcdfoot2 A foot for desktop standing mount. lcdfoot3 A foot for desktop 60-degree angled mount. lcdfoot6 Same as above, but much slimmer veion. lcdhook1 A hook for hanging, but maybe specific to this chest. There is a support for RPi Zero, too, with easy access from the outside by removing that part of the wall along the cuts. RPi3 Model A can be mounted too, but a lot of creativity would be required. Assembly requires some screws. Driver board – 4x M2, M3, or #4 wood screw (example) Mounting brackets – Some M4 or #6 machine screws (example) (更新2019/3/8)新版本已公开 (更新2019/1/21)增加了放桌子用的腿。 7英寸HDMI/VGA LCD模块 是专用的箱子。这个模块是本地分辨率1280x800,但可以输入1920x1080(自动缩放)。 该情况对应于VEESA 75mm/100mm挂载。我想大部分的监视器臂都能使用。 也适用于上下颠倒安装。按钮部分可以颠倒。 组装箱子需要以下3个文件。 背面3 lcd3front前面 Icdhid1按钮和IR受光部 其他文件是安装用的挂钩和脚。请根据需要打印。 直立放置的腿 为了在3台上以60度的角度放置的腿 同上,细版本 从架子上吊的挂钩,但是要根据架子的尺寸 可内置RPi Zero。如果您可以将一部分的引脚从墙外切入。虽然RPi3 Model A也可以内置,但是难度很高。 组装所需的螺丝: 驱动器板4xM2/M3/#4(例) 安装用挂载为M4(例)