模型说明
请勿售卖，这会打击作者的创作积极性。
PLEASE DO NOT PRINT AND SELL THIS PRODUCT BECAUSE IT WILL PREVENT ME FROM RELEASING OTHER DESIG
1.终结者主体不需要任何切割，无损安装。
This kit does not need any shell cutting to itall
2.不过一些地方需要打磨，一些地方需要使用纸胶带固定或者加厚，有的地方需要螺丝固定，弹匣壳侧面需要机米螺丝固定弹匣
For some places you might need to sand down the shell a little bit or use paper tape to make sure it stays in place. For some places you need to use a screw to let it stay fixed and for the mag cover you will need to use some set screws
3.螺丝的规格跟nerf原装螺丝相同,部分零件提供了多种选择。
You can use nerf blaster screws for all the parts and there are multiple choices for you to choose for each part
4.目前有短突跟下拉加长两个版本。
There are currently 2 veio: CQB style and one with a longer barrel
5.弹匣壳基于rival通用弹匣设计。
The mag cover is compatible to all nerf rival mags (not worker mags sorry)
6.滑块使用M47cm 的2根内六角螺丝，以及一根M57cm 的内六角螺丝，金属推杆需要根据你使用的下拉型号单独定制。
The pump grip uses two M470mm screws and a M570mm screw, for the priming ba it varies from what pump kit you’re using, for the connector you will need two M410mm screws.
7.如果使用套件中的打印下拉，金属拉杆，325mm长，2mm厚，12mm宽，螺丝使用M41cm2，金属杆打孔位置请参考图片，一格为1mm。或者直接打印priming ba_test进行对比。
If you’re using the pump grip in my files, the dimeio for the priming ba are 325mm12mm*2mm and you will need two of these.For drilling the priming ba please refer to the picture or just print the file priming ba_test
8.几乎所有零件都留有尺寸余量，所以即使你的打印机并不精确，也可以打印。
All the models has been left a little bit more space in size so even if your printer is not accurate enough you will still be able to print and use it
因为我经常加班，很抱歉不能把尺寸做精确。后续如果有空闲时间，我会继续完善它.
I’m very busy and always work overtime so apologies that I can’t make the dimeio exact. But if I have time I will keep perfecting it.
释放的原始作者：https:www.thingivee.com/thing:4483129
ReleaseLever Original author：https:www.thingivee.com/thing:4483129
感谢兔团cheng在制作过程中给与的建议。
PLEASE DO NOT PRINT AND SELL THIS PRODUCT BECAUSE IT WILL PREVENT ME FROM RELEASING OTHER DESIG
1.终结者主体不需要任何切割，无损安装。
This kit does not need any shell cutting to itall
2.不过一些地方需要打磨，一些地方需要使用纸胶带固定或者加厚，有的地方需要螺丝固定，弹匣壳侧面需要机米螺丝固定弹匣
For some places you might need to sand down the shell a little bit or use paper tape to make sure it stays in place. For some places you need to use a screw to let it stay fixed and for the mag cover you will need to use some set screws
3.螺丝的规格跟nerf原装螺丝相同,部分零件提供了多种选择。
You can use nerf blaster screws for all the parts and there are multiple choices for you to choose for each part
4.目前有短突跟下拉加长两个版本。
There are currently 2 veio: CQB style and one with a longer barrel
5.弹匣壳基于rival通用弹匣设计。
The mag cover is compatible to all nerf rival mags (not worker mags sorry)
6.滑块使用M47cm 的2根内六角螺丝，以及一根M57cm 的内六角螺丝，金属推杆需要根据你使用的下拉型号单独定制。
The pump grip uses two M470mm screws and a M570mm screw, for the priming ba it varies from what pump kit you’re using, for the connector you will need two M410mm screws.
7.如果使用套件中的打印下拉，金属拉杆，325mm长，2mm厚，12mm宽，螺丝使用M41cm2，金属杆打孔位置请参考图片，一格为1mm。或者直接打印priming ba_test进行对比。
If you’re using the pump grip in my files, the dimeio for the priming ba are 325mm12mm*2mm and you will need two of these.For drilling the priming ba please refer to the picture or just print the file priming ba_test
8.几乎所有零件都留有尺寸余量，所以即使你的打印机并不精确，也可以打印。
All the models has been left a little bit more space in size so even if your printer is not accurate enough you will still be able to print and use it
因为我经常加班，很抱歉不能把尺寸做精确。后续如果有空闲时间，我会继续完善它.
I’m very busy and always work overtime so apologies that I can’t make the dimeio exact. But if I have time I will keep perfecting it.
释放的原始作者：https:www.thingivee.com/thing:4483129
ReleaseLever Original author：https:www.thingivee.com/thing:4483129
感谢兔团cheng在制作过程中给与的建议。
评论